13.56MHz HF RFID Reader/Writer Module JMY505

Sample Price: 21.43   U.S. Dollar
Minimum Quantity: 1   Sheet
Origin:
Production Capacity: 100000pcs/month
Last Updated: 2018-08-27
Supplier Information
[ ]
General member Free member      

Business Type:Manufacturer

Main Products: RFID contactless reader, proximity card reader, contactless reader, rfid card reader, uhf rfid reader, proximity readers, contactless card reader, rfid tag reader, RFID reader, RFID module, Mifare card, smart card reader

Contact: Lin     Contact Now

Phone:010-69559637

Website: http://www.jinmuyu.com/english/index.htm


Detailed Description

JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.

  • Qualifications:
  • PCD: MF RC500, RC531, RC632, RC400
  • Working frequency: 13.56MHz
  • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
  • RF standard: ISO14443A, ISO14443B, ISO15693
  • Operating distance: 100mm(depending on card and antenna design)
  • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
  • EEPROM: 512 Bytes
  • Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
  • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
  • Max.command length: 511 Bytes
  • Interface level: 3.3V(TTL level; 5V tolerance)
  • Power supply: DC 5.0V
  • Power consumption: 70mA
  • Dimension: 42mm×21mm×8mm
  • Package: DIP32
  • Weight: about 15g
  • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
  • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
  • ISP: Supported
  • RoHS: Compliant
  • SDK&Program:
  • Manual:

ProductsSellingleads